Painting - Repaint stripped oak cabinets - Oil based or melamine
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Repaint stripped oak cabinets - Oil based or melamine
GoldieF50
07-09-07, 12:26 PM
Hello,
I have completely stripped our kitchen cabinets and am now ready to prime/paint them. I am getting mixed advice....some people are telling me that oil is the best way to go, others suggest melamine. I am using Zinssers Cover Stain for the primer.
Which would be my best choice for the paint?
I have completely stripped our kitchen cabinets and am now ready to prime/paint them. I am getting mixed advice....some people are telling me that oil is the best way to go, others suggest melamine. I am using Zinssers Cover Stain for the primer.
Which would be my best choice for the paint?
slickshift
07-09-07, 05:25 PM
Oil-based enamels will provide slightly better duration, but also yellow more if not exposed to sunlight (as in indoors)
Honestly though, the Waterborne Enamels (not latex wall paint-there's a difference) today are almost as good as the oil enamels, and more forgiving to use and easier clean-up
Honestly though, the Waterborne Enamels (not latex wall paint-there's a difference) today are almost as good as the oil enamels, and more forgiving to use and easier clean-up
GoldieF50
07-09-07, 05:33 PM
Thanks for your reply. So I should omit melamine paint entirely? As far as the waterboure paints do you have any specific recommendations?
Thanks again.
Thanks again.
marksr
07-09-07, 07:50 PM
I can highly recomend SWP's proclassic waterborne line. B. Moore's is supposed to be good also [I've not used it]
slickshift
07-10-07, 05:47 AM
Ben Moore's Impervo (waterborne enamel) is also very good and I can recommend it
GoldieF50
07-10-07, 10:09 AM
Thanks for all your help.
GoldieF50
07-19-07, 08:10 AM
Unfortunately I have just found out that Waterbourne Satin Inpervo is not available in Canada. Do you have any other possible recommendations.
sirwired
07-19-07, 08:32 AM
As marksr posted, if you have Sherwin Williams up there, see if you can get ProClassic Waterbourne.
SirWired
SirWired