Evaporative Water Coolers - Old Plastic Evaporative Cooler
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Old Plastic Evaporative Cooler
royboyzz
06-28-07, 04:00 PM
My old evaporative cooler needs a new shroud (the outside shell with vents to let the air through the pad) around the water pad. The cooler is a round type roof mount system and I don't know the MFG or Model numbers. Where can I find something to replace the outer shroud for the pad, or is there something you know of that will subustute for the plastic outer shroud.
Also, the water tube at the top of the cooler that provides water to the pad is above the pad in some places and to the side of the pad in other places. The water holes on the supply tube are on the outer edge of the tube, not on the bottom. I dont know if the pad should cover the water holes.
Also, the water tube at the top of the cooler that provides water to the pad is above the pad in some places and to the side of the pad in other places. The water holes on the supply tube are on the outer edge of the tube, not on the bottom. I dont know if the pad should cover the water holes.