Air Conditioning - air handling unit wont shut off
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : air handling unit wont shut off
beginner144
06-13-07, 10:48 AM
when i turn the ac on, both the condensing unit and the handlling unit are running fine , but the handling won't automatically shut off. It runs all day. Yes and it's in auto mode. Any suggestion? thanks
JavaBob
06-13-07, 10:54 AM
Shorted wires thermostat base bad, stuck relay maybe..
beginner144
06-13-07, 11:02 AM
i changed a new thermostat not but help. what should i do next?
jim-connor
06-13-07, 11:57 AM
If the blower still runs when the wires are disconnected from the stat, then you likely have a bad blower relay. On newer systems, the relay is soldered to the circuit board. Hence, replacement of the board.
If, on the other hand, the blower shuts off when the stat is disconnected, you likely have a bad or miswired stat.
If, on the other hand, the blower shuts off when the stat is disconnected, you likely have a bad or miswired stat.
beginner144
06-13-07, 08:48 PM
thanks jimconner
When the air handling unit blowing, i disconnect all the wire from the stat but it still running. So it's gotta be the blower relay. I'm pretty sure all the wire run correctly when i changed the new stat. The blower got a thing look like a capacitor where all the wires run in. Is that the blower relay? My unit about 15-20 yrs old. You think the relay is soldered in the board ?
When the air handling unit blowing, i disconnect all the wire from the stat but it still running. So it's gotta be the blower relay. I'm pretty sure all the wire run correctly when i changed the new stat. The blower got a thing look like a capacitor where all the wires run in. Is that the blower relay? My unit about 15-20 yrs old. You think the relay is soldered in the board ?