Heat Pumps and Electric Heating - Honeywell RTH7000 wiring help
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Honeywell RTH7000 wiring help
alwaysneedshelp
06-04-07, 06:19 PM
here's what I've done so far but I'm missing the C terminal which was not used on the old Honeywell
my heat pump is a Rheem there's an orange unstripped wire
I'd like to do this myself
http://www.pbase.com/cbwhite/image/79991025.jpg
my heat pump is a Rheem there's an orange unstripped wire
I'd like to do this myself
http://www.pbase.com/cbwhite/image/79991025.jpg
CiiTech
06-06-07, 05:51 PM
If you turn off power and open the indoor unit you will find the other end of the tstat wiring.
The L wire should go out to the out door unit.
If the orange wire (can't see it in the pic) is not connected at the indoor unit, connect it to "C" at both the indoor unit and tstat. But, depending on manufacturer and age it could be "X" or "B" at the indoor unit.
Should be fine.
The L wire should go out to the out door unit.
If the orange wire (can't see it in the pic) is not connected at the indoor unit, connect it to "C" at both the indoor unit and tstat. But, depending on manufacturer and age it could be "X" or "B" at the indoor unit.
Should be fine.