Toilets, Sinks, Showers, Tubs and Disposals - Can't find new seal for Enviro-Tech Faucet

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
Steve Ruddy
05-15-07, 03:18 PM
Apparently the Enviro-Tech brand is no longer available and I can't find a spring and seal set to repair one. Anyone lnow who has one or what else will work?

Suzanne Butler
05-29-07, 11:47 AM
I am having the same problem. Have you found anything to repair the faucet?
Thanks, Suzanne
Steve Ruddy
05-29-07, 07:58 PM
Yes Susan I used a replacement seat and spring kit manufactured by danco. I bought it at Home Depot. The packaging says Delta/Peerless DL-17. Don't use the provided springs re use your old springs. Here is the manufactures website if you can't find it www.danco.com

Suzanne Butler
05-31-07, 09:16 AM
Dear Steve,
Thank you!
Suzanne
Steve Ruddy
05-31-07, 10:00 AM
Well don't thank me yet it started leaking again last night. It only held up for a week. I'll let you know what I find out.
geckocycles
11-10-08, 06:41 PM
I went to Lowes and got Brass Craft #0082 seats and springs for Delta SIngle Lever. Used the shore cone springs and short seats. No issues
Large O-Ring is #0672
THe small O-Ring I left alone but it is available too.

I need the cartridge the handle goes onto because mine is cracked on one of the faucets. I tried Brass Craft #1149 for a Valley faucet. It works but the flat that locates the handle is on the wrong side and the OD is a little bigger where the handle goes on. A file took care of that and now works but I would like to get the factory replacement part.