Walls and Ceilings - How to cut through a metal stud?
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : How to cut through a metal stud?
JimInFLA
05-10-07, 01:34 PM
In the wall is an outlet and about 6 inches to the right i need to feed some wire to another outlet.
The problem is there is a metal stud between the two. So, with having 2 small holes in the wall, how can this metal stud be cut to feed the wire through?
The problem is there is a metal stud between the two. So, with having 2 small holes in the wall, how can this metal stud be cut to feed the wire through?
Wirepuller38
05-10-07, 02:25 PM
There should be holes in the stud for wiring to pass through. If not, cut the holes with a hole saw. A right angle drill may be helpful here. You may have to cut from each side of the stud rather than cutting all the way through from one side.
Remember to install the proper bushings to prevent damage to the insulation on the wire.
Remember to install the proper bushings to prevent damage to the insulation on the wire.