Electronic Alarms and Home Security Devices - Ademco Vista Zone Types
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Ademco Vista Zone Types
tzzoooma
04-22-07, 10:03 AM
Almost finished adding a wireless to my Vista 15.
What is the best/correct ZT for glassbreak?
What is the best/correct ZT for motion?
Should I use Report Code of 10 for all sensors?
Even a 5801 remote?
What is the best/correct ZT for glassbreak?
What is the best/correct ZT for motion?
Should I use Report Code of 10 for all sensors?
Even a 5801 remote?
MrRonFL
04-22-07, 02:02 PM
For the glass break, perimeter (03) is the best choice, but you could use interior follower (04) (it would auto bypass in stay mode). Motions are nearly always interior follower.
All that report code does is enable that zone to report in Contact ID, so it is a good default. You don't really need it for the keyfob, but it doesn't hurt anything, so program it in.
All that report code does is enable that zone to report in Contact ID, so it is a good default. You don't really need it for the keyfob, but it doesn't hurt anything, so program it in.