Kitchen Large Electric Appliances - Maytag Neptune

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Maytag Neptune

cjacob
03-04-07, 05:30 AM
I have a Maytag Neptune Washing machine model MAH5500. Is the past week during the spin cycle there is a loud noise like bumping or an out of balance drum. This happens occasionally with large or heavy loads but evens out in about 10 seconds. Lately it does not even with a light load. This is my first foray into repairing a front loader. Could this be a broken spring? Do they even have springs on front loaders like a top loader does? Any help is appreciated.

Charley

bambiblaster
03-04-07, 04:45 PM
See if there is alot of play with the basket itself by rocking it... if none.. open door remove 2 scews on left side then 2 on right side... hold up door level and close.. Grab top of outside sides on front panel and pull foward.. now you have access to the shocks... open door again and put back in the 2 hinge screws and you can un and watch underneath...


this site will also help you


http://www.applianceaid.com/neptune.html