Furniture, Wood and Cabinetry Finishing - Drips on my cabinets

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Drips on my cabinets

lbphathead19
02-16-07, 01:03 PM
I had some touch ups to take care of on my kitchen cabinets. I sanded and restained a 12 in by 12 in section. I then applied some water based clear coat (Minwax Polycrilic). However, I went back a while after apllying it and noticed many drips and bumps. What are my options. I would rather not have to strip down and take off the clear coat. Would I be able scrap the bumps out with a fine blade?

Please help!!!!!

marksr
02-16-07, 01:36 PM
Cutting off the drips with a razor blade would probably be better than sanding the drips off. You will still need to sand a little. Pay more attenion on the next coat :D
lbphathead19
02-16-07, 04:22 PM
Thanks for the quick reply. I figured I would cut off the biggest with a razor blade and then feather in the edges. I just need to wait until the clear coat dries completly and then sand.