Electronic Alarms and Home Security Devices - Shed wiring

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Shed wiring

ultram
02-09-07, 06:48 PM
First time posting.

I need some help programing my allarm system, hear is what I have.
DSC PC1555 Pannel and a PC5508Z Keypad.
The system is working perfectly, I have a Shed about 100ft away I wired to my Keypad to the Z terminal and to GRD sins I am out of zone's on the Pannel ther are only 6 and they are used. Hear is what I programed.

*8-inst code
000
0
11
#
020
07
#
Wait one full minute then press
#####

*8-inst
001
01-04-03-03-03-03-03-00
##

*8-inst
015
7
1
#
380
1
##

I used my DVM to scheck the wire from the Shed for continuity and it was good.
For some reason the Keypad dos not see the Shed? I must be mising somting in my programing? but I dont know what.
Can someone look it over and showe me my mistake?

THAN'S in advance.

MrRonFL
02-10-07, 03:24 AM
Is the zone staying open, or not reacting when you open the zone?
ultram
02-10-07, 07:09 AM
HI
Is the zone staying open? dont know what you mean.
I dont know if it is reacting or not, there is no indication at the Key panel.

Thank's

ultram
02-10-07, 08:54 AM
MrRonFL When I open the door the DVM has no reading, when I close the door I get a reading.
In section 202 it showes 1 throw 6 active, 7 & 8 off.
ultram
02-10-07, 09:41 AM
Got it working, had to go into 202 and turn it one.

Thank's for your help.

ULTRAM