Electronic Alarms and Home Security Devices - sentrol glass sensor problems

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : sentrol glass sensor problems

IDIS
01-29-07, 07:19 PM
I have a dsc 632 pc1555 cp-01 using the pc 5508 keypad. I have the alarm up and running, but am having problems with the sentrol 5777 glass break sensors. The four 5777 sensors are hooked up in series on zone 3, with zone 3 set at 05. I opened the main entry door, when system was armed, alarm went off, and I disarmed the alarm. Now the #3 led on keypad is lit, and I dont know how to reset this. I dont know if the 5777 sensors need to be reset or what. Can anyone help me out here???
Thank you in advance!!

MrRonFL
01-29-07, 07:28 PM
That's the alarm memory. Press # to return to normal run mode, then arm and disarm to clear the alarm memory. It's one of those things that's kinda buried in the User Manual.