Electronic Alarms and Home Security Devices - help with control panel programming

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
mannex
01-16-07, 03:35 AM
my ADT intruder alarm is no longer monitored at receiving centre and the bell was always going off so i disconnected mains and battery.now i need to reprogramme it but i don`t know the codes.

MrRonFL
01-16-07, 05:42 AM
ADT is not a maker of hardware, they have different manufacturers modify systems that they sell under their label.

What is the ADT system model? Different systems require different programming.
mannex
01-19-07, 10:53 AM
my system is compliant with BS4737 intruder alarm system and the panel is ACCCORD XPC.

MrRonFL
01-19-07, 01:24 PM
By that make and model, I will assume that you are in the UK. From recent posts, typically alarm systems in the UK are strongly protected by installer lockout codes and tamper switches. Here in the US 6321 is pretty much the standard installer code for ADT, so you can try that. If it doesn't work, based on a quick read of the manual, pressing * + # within 5 seconds of power up is supposed to reset the installer/engineer code and master code to the factory default: (9090 and 1234 respectively).