Electronic Alarms and Home Security Devices - Dsc Pc5010

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Dsc Pc5010

tomw
01-12-07, 08:50 PM
I have a DSC PC5010 and a LCD5501Z keypad. The trouble light is on, but there are no troubles listed when I hit *2. The ready light is also on and I can arm the system.
Any ideas?
thanks.

umpire1101
01-12-07, 10:22 PM
sometimes the trouble light will light if the time or date has been lost.
try setting it and see if the light goes out.

good luck
tomw
01-13-07, 08:55 AM
Thanks for the reply. I've tried that, but it didn't help.

MrRonFL
01-13-07, 09:30 AM
Try this thread: http://forum.doityourself.com/showthread.php?t=207592&highlight=5501z

It's this very obscure glitch that happens when one "fat fingers" the keypad while turning on and off option selection programming. It applies to any of the programming locations that are labeled "for future use".
tomw
01-17-07, 10:38 AM
That worked, thank you very much.