Electronic Alarms and Home Security Devices - disable dialer on Vista 20P

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : disable dialer on Vista 20P

sparky01
01-11-07, 07:52 PM
Could someone help point me in the right direction to disable the dialer and line monitor functions. My system is only used to activate an interior and exterior horn. I don't need the dialer. I think this is causing the annoying beep ever so often. Thanks in advance.

MrRonFL
01-11-07, 08:06 PM
In programming, enter *41*, *42* and *94* and *92 0 0
exit programmming with *99.
sparky01
01-11-07, 08:13 PM
Thanks. I will give it a try in the morning.

ricklucy
04-02-09, 07:58 PM
I have a safewatch pro 3000 or ademco24 // how do you get into programming to disable the dialer portion and stop the 94 error. been getting this since switching to voip. Any help would be greatly appreciated.
MrRonFL
04-02-09, 09:07 PM
It's a modified Vista 20p, websearch using the phrase "Vista 20P installer manual".

In the sticky titled "Alarm Forum FAQ (Please read before posting), the basic steps to access programming so you can extract the installer code are posted. Once in there, you disable the dialer using the keystrokes from this thread.