Entertainment Center: TVs, Stereos, VCRs and DVDs - Zenith rear proj TV model PV4661LK
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Zenith rear proj TV model PV4661LK
19bart71
01-07-07, 05:46 PM
I would like to know the best resoltion this set will show... regular TV antenna gives approx 340+ DPI I believe.. seems I remember this set will show 680.. can anyone confirm ? I would like to get HD signal and hope this set would jump up to 680 or whatever it's maximum happens to be...
HotinOKC
01-07-07, 08:08 PM
If you do not have the three required connections for component hookup, then you cannot view HD format.
The three connections are: Blue, Green, and Red.
NOT the yellow, white, red plugs in most electronics.
If your TV has these component hookups, you resolution will be at least 720P and probably 1080I, which is standard for HD ready TV's.
This TV seems very old, because I can't even find any specs on it through Google.
The three connections are: Blue, Green, and Red.
NOT the yellow, white, red plugs in most electronics.
If your TV has these component hookups, you resolution will be at least 720P and probably 1080I, which is standard for HD ready TV's.
This TV seems very old, because I can't even find any specs on it through Google.