Kitchen Large Electric Appliances - Whirlpool RE960PXP Self-cleaning oven

I replaced the analog clock assembly and in doing so, stupidly didn't mark the connections to the wires. I have no wiring diagram and Whirlpool, nor any repair shop will release the diagrams or they don't have them. I do have the clock working,but I have 2 left over wires. 1 orange and 1 red. My self-cleaning oven does not heat up, although the lock light comes on. It looks like the 2 wires I have go to the timer. The orange to the Start time and the red to the Stop time. The analog clock has 4 terminals. 1 on one side and 3 on the other. I have hooked 2 white wires to the one side and 2 black wires to the middle terminal on the side with 3 terminals. With this hook up, the clock works. The upper terminal on the side with 3, has an arm (like a contact) that goes down to the lower terminal, but is not physically attached to this terminal. I would like to know where these 2 wires connect to on the clock assembly. Tks.

Niija