Doors and Windows - door jamb and split jamb widths

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : door jamb and split jamb widths

gianni
01-02-07, 11:01 AM
Hello All.

I have standard 2X4 framing with 1/2 sheet rock. I am trying to finish trim my pocket door installation. Does anyone have any insight as to how wide my door jamb should be? 4 5/8"? 4 3/4"? Also, the pocket door installation guide says that i need to have 2" for the clearance. Should I then make my split jambs 1/2 or my door jamb minus 1" on each side? (i hope that makes sense :))

Thanks for your insights!!!

Just Bill
01-02-07, 04:50 PM
The far side jamb should be whatever the wall thickness is, usually 4 9/16, unless it is a plumbing wall. The near side will be the door width -clearance, to the finished wall side.
garywms
01-03-07, 02:33 PM
The Johnson company makes a jamb kit specifically for pocket doors. It has the pieces already ripped and the one solid jamb. Try to find it. Your local Home Depot or Lowe's should carry it