Gas and Oil Home Heating Furnaces - Need help in troubleshooting

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Need help in troubleshooting

gopirajiv
10-22-06, 12:44 PM
My AC and Heat isnt working
Where should I start looking?

I have tried replacing teh thermostat, bringing down teh temprature very mow as well as taking it high
Neither will force the AC or heat to kick in
Any ideas ?
Getting desperate...

I have a AC unit from Amana
and Gas based\forced ai heating

I bought the house from someoen so am not teh original purchaser of these units

Ed Imeduc
10-22-06, 01:19 PM
Start with do you have electric power to the furnace 110V and 220V to the AC. is the 24V transformer good or a fuse out on the board.
Might be as you are new call a tech and be there when they come. Go over the hole unit with them. Dont forget a new air filter ever 30 to 90 days .
Stay in one post here , we can help you a lot better that way

ED ;)
Jay11J
10-22-06, 04:31 PM
Have you checked to make sure the breaker/fuse at the main panel is on/ok?

Some homes had a power switch/fuse next or near the furnace. make sure that's is on/ok as well.

gopirajiv
10-22-06, 04:46 PM
Did that..
BTW- There is another thread I posted with title 'AC wont work' in Air conditioning
Please post to taht instead of this

Thank you for your attention...