Kitchen Large Electric Appliances - awz 650 thermostat installation
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : awz 650 thermostat installation
simmo
10-16-06, 08:49 AM
Hi im trying to install the new circular plugs i have just ordered as my dryer stopped heating.
I had a tech come past and tell me the thermostat had gone but he didnt have the replacement kit. I ordered it from the net, but as i didnt see him disassemble the dryer im not exactly sure how to reassemble it.
I have figured as much as putting the new bracket on and securing the connectors to the machine.
What I have to find out is which wiring is attached to which particular connector.
If you sit the connectors on the table they look like little heads with devil horns pretuding out the top and a silver base im guessing serves as a conductor. Adaptor is about the size or a thumbnail
In the kit you recieve a A260 and a A210. Which is meant to connect to which part of the wiring I just dont know. Im reluctunt to do trial and error worried i will short circuit something in the machine.
There are 2 green plugs and two white plugs which have suffered slight melting damage from when the original problem occured but everything seems in good order.
Thanks for your help
I had a tech come past and tell me the thermostat had gone but he didnt have the replacement kit. I ordered it from the net, but as i didnt see him disassemble the dryer im not exactly sure how to reassemble it.
I have figured as much as putting the new bracket on and securing the connectors to the machine.
What I have to find out is which wiring is attached to which particular connector.
If you sit the connectors on the table they look like little heads with devil horns pretuding out the top and a silver base im guessing serves as a conductor. Adaptor is about the size or a thumbnail
In the kit you recieve a A260 and a A210. Which is meant to connect to which part of the wiring I just dont know. Im reluctunt to do trial and error worried i will short circuit something in the machine.
There are 2 green plugs and two white plugs which have suffered slight melting damage from when the original problem occured but everything seems in good order.
Thanks for your help