Electronic Alarms and Home Security Devices - DSC PC5132 w/WS4939 Key Fob Programming

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
egor127
10-07-06, 04:05 PM
I just installed a PC5132-433 on a DSC 1555 and was able to program three of the four buttons on the WS4939 wireless key. I'm unable to program the Disarm button. According to the manual 27 is the proper entry for Disarm in section 59. I also have programed access codes in slots 17/18.

Any help to point me in the right direction?

Thanks...

MrRonFL
10-07-06, 04:54 PM
What are the keystrokes you entered after going to section 59?
egor127
10-07-06, 11:51 PM
Keystrokes were 03042730, which should be 03-Stay/04-Away/27-Disarm/30-Panic.

I've since added a second key fob, which works with the above codes. The first still will not work for disarm function.

I enroll the keys in slots 41 & 42, which should be wireless keys 01 & 02.

When panic button is press, Alarm Keypad flashes "program" light for a few seconds and returns to Armed.

MrRonFL
10-10-06, 11:03 AM
Either you have a bad keyfob or there is something else that is not being described.
MrMAS
11-18-07, 11:37 PM
Hello,

I just posted a similar thread. Then I found this one, but there is really no answer in the thread. I do not have two keys but this thread gives me an idea to leave the first keyfob entry in place, changing just one digit and then program the next slot for the only keyfob I do have.

I have the manuals and can figure out the basics but this one has me stumped. Another thread said to reset the 5132 with *8 [code] 804 996 [code] 996.

10 minutes later....

Never mind, the other thread gave me the great idea to remove the keyfob ESN and put back in. FIXED. I had the keyfob ESN programmed in 5132 zone 17 - deleted that. Then I moved the keyfob ESN from the first key to the second key. I may try to move it back to the first key later.