Electronic Alarms and Home Security Devices - Need to Program Dialer
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Need to Program Dialer
Dreeka
10-03-06, 03:31 PM
Hello
I have a ademco Vista-15PMT control panel with 6150 Keypad. I removed the system from my business, and installed it in my home. How can I set the system not to call Monitronics, and to call my cell phone instead?
Thank
Dreeka
I have a ademco Vista-15PMT control panel with 6150 Keypad. I removed the system from my business, and installed it in my home. How can I set the system not to call Monitronics, and to call my cell phone instead?
Thank
Dreeka
MrRonFL
10-05-06, 05:35 AM
Take a look at the FAQ for how you bootstrap into programming and extract the installer code from an ademco panel. The location for the installer code will be #20.
Once in programming once you have read back and recorded the installer code, enter *41*, *42*, and *94*. This should erase the existing phone numbers in the panel.
These panels weren't really designed with cell phones in mind. You can use the pager output to have it call your phone, but you won't get any information beyond the fact that your home phone called.
That said, you enter *160 + [cellphone number]*
Then enter *162 4
Exit programming with *99
This is a version of the Vista 15P modified for Monitronic, so there may be parts of the programming that cannot be altered.
Once in programming once you have read back and recorded the installer code, enter *41*, *42*, and *94*. This should erase the existing phone numbers in the panel.
These panels weren't really designed with cell phones in mind. You can use the pager output to have it call your phone, but you won't get any information beyond the fact that your home phone called.
That said, you enter *160 + [cellphone number]*
Then enter *162 4
Exit programming with *99
This is a version of the Vista 15P modified for Monitronic, so there may be parts of the programming that cannot be altered.