Electronic Alarms and Home Security Devices - Need Master Code DSC classic LCD600

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
vray
09-28-06, 06:03 PM
Help, I recently purchased a repo home. I don't have the code to reset my system. Does anyone know how to reset the system or do I need to buy a new box?

MrRonFL
09-28-06, 08:06 PM
LCD600 is an upgrade keypad that works on about 9 DSC system. You need to look at the box that houses the actual control motherboard and battery to get the correct model number. On most it will be on a diagram one the inside of the enclosure door. If not, it will be on a label on the main IC chip on the motherboard.
vray
09-30-06, 01:48 PM
The model number is PC 1550.

MrRonFL
09-30-06, 11:31 PM
Try entering *8 1500
If the keypad displays: "Enter 2 digits for PGM section" press # until it goes back to run mode, and let us know. How you proceed will depend on the results.

You can also try it with *8 1550.