Doors and Windows - Metal door-how do I install screws to hang a dartboard?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
fixeruppermom
09-07-06, 12:03 PM
Hello! I've drilled plenty of holes in my lifetime for screws, but never in a metal door. I need to install 2 screws on the interior of our metal (I'm not sure if hollow or foam inside) basement door, from which I will hang a dartboard that has keyhole slots. What's the proper way to drill the holes, and do I need to use an anchor or a toggle bolt contraption to properly seat the screws?

Many thanks!
fixeruppermom

johnam
09-07-06, 03:51 PM
Metal doors are very thin. You could use a 3/32" drill bit of make a tiny hole with an awl. Use a 1/2" X #6 or #8 sheet metal screw and that will hold the dart board
chandler
09-07-06, 05:29 PM
Or you could use a self tapping 1/2" x 6 or 8 screw, and you won't have to drill a hole. Since it has keyholes, make sure your holes are pretty precise.