Kitchen Large Electric Appliances - Electric Washer Not Spinning - How Remove Tranny

Kenmore Model 110.92581220
Over 10 Yrs Old

Stopped spinning.

I removed the motor and I can see the problem but do not know what the part name is - It's black rubber (not a belt) 2 inches - almost circular and lookes like it sits on a white plastic disc that has broken pegs that should extend into the black part. I want to remove the tranny and take it to a store to get an exact replacement part.

How do I take out the tranny??? I'll attach pictures - in one I am holding this black part. Note the motor is out and you are looking at the washer from the bottom (I laid it on it's back).

Oh no - I can't attached pictures.

this is the black thing between the motor and tranny that is shot
http://www.partselect.com/xq/aspx/Inventory.334626/qx/PartDetail.htm?SourceCode=7&ModelNum=110.92581220

i can not find a tranny picture - i took out three bolts that were obvious but now i'm stuck.

Its called a coupler... Part number 285852.. here ishow to replace it...

http://www.american-appliance.com/service_pages/wp_dd_wash/ddwashmotorcoupler.htm

Its called a coupler... Part number 285852.. here ishow to replace it...

http://www.american-appliance.com/service_pages/wp_dd_wash/ddwashmotorcoupler.htm

That's the best reference I have had. Unfortunately I was too eager and jumped the gun and though I had to take the tranny out because the one part of the coupler I could not pry off the tranny. I was going to bring the entire tranny to a shop and have them pry it off..... well I broke the seal on teh tranny and made a huge mess. Now the local appliance shop tells me that it's not a good idea to try to replace the tranny fluid or even the entire tranny... just get a new machine.

Can the tranny fluid be replaced? I'm guessing I lost it all or just about all of it - at least a couple cups are on my floor.

it can be done but a rebuilt tranny is about 75.00