Solid Hardwood, Engineered and Laminate Flooring - could use some opinions / guideance (Compound mitre saw)
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : could use some opinions / guideance (Compound mitre saw)
Sniperman
07-23-06, 03:11 AM
ive been looking for a compound miter saw that will do my upcomming laminate flooring project but i will also be using it for other projects in the long run, the planks are 7" 1/2 so i think i will have to go with a sliding saw which are kinda pricy and i want to stay under $250 price range, this is the cheapest ive found http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91935
ive shoped there before and i like their prices and items, but i dont know if i should buy such an item at such a low price since its something i want to last me quite a while for lots of projects.
its a floating install over cement, i already have the installation kit which has the underflooring.
i will be ending the laminate flooring at stairs do i use a stair nose or just a regular transition? would it be wise to continue the laminate floring to cover the stairs as well at the bottom of the stairs is white ceramic tile, not sure if i want to do the stairs myself seems like its more of a pro job since it will require glue and other techniques.
any help is greatly appreciated.
ive shoped there before and i like their prices and items, but i dont know if i should buy such an item at such a low price since its something i want to last me quite a while for lots of projects.
its a floating install over cement, i already have the installation kit which has the underflooring.
i will be ending the laminate flooring at stairs do i use a stair nose or just a regular transition? would it be wise to continue the laminate floring to cover the stairs as well at the bottom of the stairs is white ceramic tile, not sure if i want to do the stairs myself seems like its more of a pro job since it will require glue and other techniques.
any help is greatly appreciated.
majakdragon
07-23-06, 07:11 AM
Sniperman, Welcome to the DIY Forums.
Please note that I am not bashing Harbor Freight tools as I own quite a few of them myself. Much depends on how often you will be using the tool and the quality of the cuts you expect. Cheaper tools use cheaper materials This can compromise the quality, especially squareness of cuts. Quality of the blade also makes a difference in how the finished cut looks. The frequency of use also is a factor when it comes to the internal parts lasting (bearings, bushings etc) All this should factor into your choice. All of the above applies to ANY price tool you may consider buying. Good luck with your projects.
Please note that I am not bashing Harbor Freight tools as I own quite a few of them myself. Much depends on how often you will be using the tool and the quality of the cuts you expect. Cheaper tools use cheaper materials This can compromise the quality, especially squareness of cuts. Quality of the blade also makes a difference in how the finished cut looks. The frequency of use also is a factor when it comes to the internal parts lasting (bearings, bushings etc) All this should factor into your choice. All of the above applies to ANY price tool you may consider buying. Good luck with your projects.