Electronic Alarms and Home Security Devices - Moving Motion From One Zone to Another Motion Zone
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Moving Motion From One Zone to Another Motion Zone
StephenT
06-09-06, 05:01 PM
Hello Everyone,
ADT came out today to install an additional wired motion detector for my SafeWatch Pro 3000. Before, we had 2 motions and they are each on their own zone. Now we have 3 motions but he put the new one on a motion zone we sometimes bypass.
Could I simply move the new motion from the zone we like to bypass to share the other motion's zone or does it require additional programming on the keypad as well?
Hope this makes sense!
ADT came out today to install an additional wired motion detector for my SafeWatch Pro 3000. Before, we had 2 motions and they are each on their own zone. Now we have 3 motions but he put the new one on a motion zone we sometimes bypass.
Could I simply move the new motion from the zone we like to bypass to share the other motion's zone or does it require additional programming on the keypad as well?
Hope this makes sense!
MrRonFL
06-09-06, 08:52 PM
No, it shouldn't be a problem. The zone programming only knows that there is a normally closed loop attached. If you look at how they did the wiring on the zone that it's on, and copy that on the zone you want to move it to, you will be fine.