Toilets, Sinks, Showers, Tubs and Disposals - Shower Replacement

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.




View Full Version : Shower Replacement


TerryB
05-25-06, 05:11 PM
My wife has been on my butt for several years to remodel the bathroom and I'm finally going to do it. :eek: The first step is to replace an old 3-sided fiberglass shower that has cracks in the pan. The bathroom has a wood subfloor.

One question is what is the best replacement for it? :confused: I have thought about buying a solid panel shower system like Swanstone. But the panels look too thin to me. Also, the pan seems to be not very sturdy. Anyone have any pros or cons on Swanstone?

Another alternative is cultured marble or granite. The panels and pan seem sturdier but it's going to cost around $1800. The pan alone was quoted at $500. We don't have a big budget.

I also saw something called TransSolid at Lowe's similar to cultured marble which was a little cheaper. Any have experience with this?

Then there is tile. My wife doesn't want tile because she doesn't want to clean the grout. But I can tile the thing for around $500 bucks. I've followed some of the shower tile threads. This will be a considerable amount of work. Can't I use l12" marble granite tiles with non sanded grout for the walls with a small gap?

I could also do a combination of TranSolid pan with tile.

Do solid shower pans need a mortar bed underneath? And do you put the mortar bed right over the sub-floor?

Also, there will be dry rot and I will need to replace the sub-floor under and around the shower. The sub-floor is 4X8 panels. I will have to cut the floor out flush with the bottom plate and build a support framing. Is there anything special I need to know about this?

Tomorrow I'll begin ripping out the shower to see what I've got.

Any advice, suggestions, or help is appreciated.


594tough
05-26-06, 08:03 AM
In my opinion , the maintenance on a tile shower is not that hard. Get it done, use a good sealer once a year, and you will have not issues with the grout. I much prefer the lonngevity of tile over cultured marble or acrylic panels. I don't thing granite or marble are any easier to clean than tile.

Removed reference to another Forum website. Not permitted in the DIY Forums.

TerryB
05-27-06, 02:23 PM
Thanks for the advice, Tough. I visited the site the other day and was going to post my tile questions there and the tile forum here if that is what I decided. I think I've convinced my wife to go with tile.


andy2
05-28-06, 06:59 AM
I did the plumbing with help in our bathroom. Living in an older house I found a lot of surprises when I tore out the wall.

After the plumbing was done professionally I used green board (moisture resistant drywall) around the tub. Then I covered the wall with a tub surrond. Hire somebody, if you have to, do the plumbing.

Good luck!

Andy

TerryB
05-30-06, 12:35 PM
Thanks for the reply Andy. I'm a die-hard diy-er. ;) I've ripped everything out and have a few surpises that includes dry rot.

I'm going to get pictures and post on different forums to get some detailed help.