Kitchen Large Electric Appliances - vibration problem whirlpool washer

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
jfunk
05-11-06, 03:09 PM
i have a whirlpool washer model number LLR6144BQ1 i replaced the motor couple and now has a severe vibration on the spin cycle.i have leveled the washer and has not helped. from what i can tell the balancing ring is ok and all springs and suspension are intake any help would be app.thank you

HALRE13
06-03-08, 10:09 AM
I also have a vibration problem in my 4 1/2 yr.old Maytag washer. In the spin cycle, it actually slams against the sides and tries to walk out the door. I was a major appliance servicer for many years. This machine acts like an unbalanced load even when balanced. It is level on the floor. I replaced all the springs holding the tub. The problem still exists.
pugsl
06-03-08, 03:53 PM
on the whirlpool did you lift the back until you hear a click? tilt back to you until loud click thats the self leveling legs setting.
Maytag as a problem with tub hitting sides. With machine off is the basket leaning to one side? there is a kit with springs and snubber, snubber goes between tub assy and base. Have also had to change base once to stop shaking