Electronic Alarms and Home Security Devices - Vista-15p - How do I reset the code?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
kolstroem
04-06-06, 08:15 PM
I recently purchased a house with a ademco Vista-15p system already installed. I want to use the system without signing up for the monitoring. How do I reset the code? How do I program it to work without monitoring?
I appreciate any help!

Kim Olstroem

dell211
04-06-06, 09:19 PM
check this link to a previous post relating to the installation code, the manual for the vista 20p includes the 15p as well.

goto: Alarm Forum FAQ (See Retrieving Code) in this article

http://forum.doityourself.com/showthread.php?t=226310&highlight=install+code+vista

and if you need an install manual you can check this link,

http://www.homesecuritystore.com/protect_ademco.html

I think the code for the Vista 15P should be 6321 if it hasn't been changed. The first link will explain the proceedure to get into the programming mode.

hope this helps
MrRonFL
04-07-06, 04:34 PM
It will only be 6321 if the system was installed/monitored by ADT. Once you have an installer code, we can walk you through disabling the dialer, and setting a new master user code.