Solid Hardwood, Engineered and Laminate Flooring - Chipped laminate - Repair?

Chipped my laminate floor. Dropped a prybar. Have a small hole about 1/4 dia and about 1/8 deep. And on a
seam between 2 boards. Somewhat, but not real noticeable. But it's in the middle of a moderate traffic area.
It's Champaigne Oak so it's somewhat light colored but the material in the hole is dark brown.
I can use a moto tool to smooth the edges, and about 2 drops of something would fill the hole.
Elmers wood glue would be just about the right color if it dried that color.
What else can I use to fill it in?

have you tried to contact the manufacturer to see if they have a repair kit?

Maybe something that is acrylic that comes in every color known to man. Something that comes with an applicator and hardens hard and fast.










Did anyone guess nail polish?

Apply a couple drops, let harden and sand it smooth very gently.

hmmmm......good idea, but that would require a Fall shade, and all the Spring colors are out now. :p hee hee!

seriously, though, i wouldn't think any sanding would be necessary - the polish will level out & dry smooth, if you don't overfill. you wouldn't want to scuff the surrounding floor with sandpaper. if necessary, clean up with acetone (ie nail polish remover - it won't damage the floor).