Gas and Oil Home Heating Furnaces - Bryant 350MAV Inducer Motor Assy
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Bryant 350MAV Inducer Motor Assy
gand0lph
01-22-06, 08:51 AM
Have a 6yr old Bryant furnace that has developed a very annoying squeal during the end of it's cycle (when the motor is slowing down).
Reason I've diagnosed that as the issue is due to the noise being generated while the main blower is still running at full speed but the inducer motor has shut off and slowing down.
Is this a difficult part to replace or do I need to have a HVAC person install it?
Thanks for your help.
Reason I've diagnosed that as the issue is due to the noise being generated while the main blower is still running at full speed but the inducer motor has shut off and slowing down.
Is this a difficult part to replace or do I need to have a HVAC person install it?
Thanks for your help.
Grady
01-22-06, 09:47 AM
Look the motor over carefully, some have oil ports & a drop or two of good electric motor oil often works wonders. I'm not real familiar with Brant equipment but most motors are fairly easy to replace.