Kitchen Large Electric Appliances - venting dryer
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : venting dryer
jamdanaur
01-15-06, 07:18 PM
we are interested in venting our dryer out through the utility room/bathroom that it is in instead of through our old garage. is it possible to run two 90 degree angles to do this. one will take the vent straight up, the other straight over to the right where it will go out through the wall. all totaled will be about 10 ft of pipe.
imagining that this is doable, we would like to use some sort of "upscale" pipe- not the flexible aluminum piping that dominates.
any suggestions on where i can go for these angles and a good- perhaps rigid, even paintable pipe?
thanks.
james
imagining that this is doable, we would like to use some sort of "upscale" pipe- not the flexible aluminum piping that dominates.
any suggestions on where i can go for these angles and a good- perhaps rigid, even paintable pipe?
thanks.
james
bambiblaster
01-16-06, 04:42 PM
thats a good setup... you can piping in 2' lenghts and the 90's at a appliance parts store or you local hardware tape the jonits to seal some codes require screws to hold joints together.....