Flooring Tile - I have removed the tile to put down hardwoods...

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
RHodgins
12-15-05, 04:38 PM
Removing the tile was accomplished using 2lb hammer. Any suggestions on how to remove the cement backerboard? The adhesive is stuck to the backerboard, and I can't see where it is nailed/screwed down. Should I stick a prybar or crowbar under the edge and attempt to pry it up? This is installed on a crawlspace - I don't want to tear anything up! Thanks.

Tilebri
12-16-05, 06:34 AM
Yes, use a pry bar. Wear respiratory protection with a NIOSH rating of N95 or better. Cbus have some pretty harmful dust.
RHodgins
12-28-05, 07:39 PM
I used a 2lb sledgehammer, then after cleanup, used a prybar to slip under a corner of the backerboard, and PRESTO! Everything is gone down to the sub floor - ready for the new hardwoods!