Electronic Alarms and Home Security Devices - Question about Safewatch 3000EN (Vista 20p) with 5804
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Question about Safewatch 3000EN (Vista 20p) with 5804
hdp203
12-12-05, 06:21 PM
I have an Ademco 5881ENH RF receiver connected to my safewatch 3000EN. It works fine with all my wireless sensors.
I am trying to add an ademco 5804 4-button to arm and disarm the system. During zone programming, the system seems to recognize the buttons fine (The system picked up the serial number when I pressed the button twice, and again when I transmitted to confirm). But after I exit the programming mode, The system doesn't respond when I press any of the buttons (press and hold for few seconds).
Please let me know what I did/didn't do right?
Thanks, hdp.
I am trying to add an ademco 5804 4-button to arm and disarm the system. During zone programming, the system seems to recognize the buttons fine (The system picked up the serial number when I pressed the button twice, and again when I transmitted to confirm). But after I exit the programming mode, The system doesn't respond when I press any of the buttons (press and hold for few seconds).
Please let me know what I did/didn't do right?
Thanks, hdp.
MrRonFL
12-12-05, 06:47 PM
With a 20p clone, keyfobs have to be associated with a user code (see the section on user code attributes in system operation in the installer manual, or the user manual.