Electronic Alarms and Home Security Devices - Concord Ultra key fob prgramming

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Concord Ultra key fob prgramming

WireKAT
12-06-05, 10:24 PM
Setting up a Concord panel with 6 key fobs. I have programmed a couple of them but they only do instant arming with no delay. Any idea how program them to do a std exit delay. I've tried changing the Sensor Group setting but no change.

Thanks!

MrRonFL
12-07-05, 04:03 PM
This is one of the instances where they stuck the information in an odd spot in the install instructions: In my copy of the manual, it's at the top of page 40, but it's easy to breeze right by it.

Keychain TP Arm (partition 1: 0513, partition 2:
0523)
Touchpad Options-Partition 1-2 (Default = off)
When this setting is on, pressing the lock button on keychain touchpads arms the system directly to AWAY with NO DELAY.
When this setting is off, each key-press increments the arming level (i.e., from OFF to STAY, from STAY to AWAY).
To change the Keychain Touchpad Arming setting
With the display showing KEYCHAIN TP ARM OFF/ON
(current setting), press 1 (off) or 2 (on). The display
flashes the entered setting.
2. Press # and the display shows the new setting.