Tools, Sharpening and Power Machinery - Portable table saw stand

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Portable table saw stand

baldeagle51
12-03-05, 09:18 PM
I have a Craftsman 10 inch table saw and i would like to purchase or build a portale stand for the saw. Everyting i find will not work with my Craftsman table saw. The modle # of my saw is 113.298142. I have spoke with Craftsman and they state that i would need to buy a whole new setup but my saw is still in great shape and i would like to keep it. Can any one give me any sugestions where i can find a portable table saw stand that will work with my saw or give me some ideas on how to build my own portable stand.

Thanks,
Mike.

MudSlinger
12-04-05, 04:48 AM
Buy a stand that will hold the size of your saw. Then cut a piece of 3/4 inch plywood to make an adapter plate from the stand to your saw.

Remember to cut out the center so the sawdust can fall to the floor.

I hope this helps