Motorcycles, Snowmobiles, Go-Carts, ATV's and Golf Carts - need help identifying motor

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : need help identifying motor

probedude05
11-19-05, 10:40 PM
heres a motor that looks EXACTLY like mine. I dont know the model number or anything for mine, and i need it to purchase a new crankshaft. If you have an idea on what model number it is that would be great. Its a 8 HP briggs & stratton. obviously one of the older models :p the pics are below


http://i10.photobucket.com/albums/a106/probedude05/35_1_sbl.jpg
http://i10.photobucket.com/albums/a106/probedude05/64_1_sbl.jpg
http://i10.photobucket.com/albums/a106/probedude05/76_1_sbl.jpg
http://i10.photobucket.com/albums/a106/probedude05/ce_1_sbl.jpg

probedude05
11-19-05, 11:39 PM
OK i came up with needing a crankshaft 1" dia, Keyway, Tapped, 7/16-20. Would i be able to fit a clutch on that crankshaft? i also found that engine model number 190452 is almost the exact same motor as mine. it has the 6 to 1 gear reduction and my motor has a gear reduction crankshaft. so im looking to change it from a gear reduction crankshaft to a tapped crankshaft so i can put a clutch on it. so the specs on my motor are 190452 8.0hp 5549/6049 492470 6 to 1 Gear Reduction and the crank shaft i plan on getting in comming from 190412 8.0hp 6023 495884 1" dia, Keyway, Tapped, 7/16-20 would it work?