Lighting, Light Fixtures, Ceiling and Exhaust Fans - Can I tap a pull chain socket light?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
Stumped1
11-04-05, 09:44 AM
I have a pull chain incandescent socket in my attic near the entry hatch. It has a receptable (to plug in something). I don't know what you call it. Can I plug another lamp into it, a shop light or something like it?

Can I remove this receptacle and run wire to the center of the attic and add a switched light fixture, the switch being where the old socket currently is.


Thanks.

joed
11-04-05, 09:47 AM
Yes to all your questions.
Stumped1
11-04-05, 09:53 AM
Great. What would be the correct wire to run to the new fixture?

John Nelson
11-04-05, 03:39 PM
If NM cable is allowed in your city, then if the circuit is protected by a 15-amp breaker, use 14/2 NM-B. If the circuit is protected by a 20-amp breaker, use 12/2 NM-B. Read two books on home wiring before beginning.