Draperies and Top Treatments - Curtain rings & telescoping rods

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Curtain rings & telescoping rods

miwukgal
11-01-05, 03:24 PM
I just installed cast iron telescoping rods and curtains that hang from rings. The rings get 'stuck' on the bump where the telescoping rod changes from small to large. I cannot pull the curtains closed over this bump. Is there anyway to make the rings slide over the bump?

Shadeladie
11-02-05, 08:58 AM
That's a problem when using these rods. They were meant for stationery panels and I'm afraid there's nothing you can do. Sometimes if you pull fast and hard, you can jump the hump :D
mitch17
11-02-05, 09:03 AM
The only problem with pulling fast and hard is that the curtains can tear if the ring doesn't jump the bump.

Shadeladie
11-02-05, 09:28 AM
Whether they tear or not would depend on how they're made (rather how well) and fabric. But just thought of something I read recently. Country Curtains sells something called a curtain tender. Similar to a baton, but doesn't attach permanently, so you can pull curtains open and closed. I'm thinking you could probably lift the ring over the bump with this. A little pricey, but may be worth it to you.
Annette
11-02-05, 11:10 AM
and if the rings are kind that you've clipped onto the fabric, the curtain probably won't tear - it will just pull out of the clip. at least, that's what mine do when i pull too hard. :rolleyes: