Wallpaper and Wallcoverings - Tin backsplash?
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Tin backsplash?
spikedog4
10-20-05, 09:28 PM
Anyone ever use the tin ceiling tiles as a backsplash or a wall and then paint it??? I wonder if it would rust? I want to create an "older" style/country look. I know this is more Victorian- but I really like them and can't think of what room other than kitchen or bath to use them?
I doubt I'd use it on the ceilings since they are quite LOW and it'd be too hard on my neck.
Any experience/advice on this?
tx,
deb
I doubt I'd use it on the ceilings since they are quite LOW and it'd be too hard on my neck.
Any experience/advice on this?
tx,
deb
Annette
10-21-05, 09:27 AM
unless they're sealed or painted, yes they'd rust.
do you already have the tins?
if not, there are tons of patterns of raised pattern/embossed paintable wallpapers that look like tin tiles that would probably be easier to install & maintain, especially in a wet area, and less expensive. most any place that sells wallpapers has some of this stuff. even the big hardware/home improvement stores.
as long as your ceiling is painted white or lighter than the walls, you could still use it on your ceilings. it'd be very charming, especially in a room with already low ceilings.
do you already have the tins?
if not, there are tons of patterns of raised pattern/embossed paintable wallpapers that look like tin tiles that would probably be easier to install & maintain, especially in a wet area, and less expensive. most any place that sells wallpapers has some of this stuff. even the big hardware/home improvement stores.
as long as your ceiling is painted white or lighter than the walls, you could still use it on your ceilings. it'd be very charming, especially in a room with already low ceilings.
spikedog4
10-21-05, 11:23 AM
Hi,
No, I didn't purchase the tins yet (salvaged ones would've been nice but pricey)
I know what you're referring to and I've seen the embossed paper in "borders"
I guess I could look around for a full wallpaper with the embossed design.
I'm just afraid of wallpaper in general having had so much trouble removing it in the past and expect it'd peel in a kitchen or bathroom due to steam/moisture. I'm the one who had the previous thread about using tone on tone stripes for the kitchen. I just read your Color 101 note though, and I agree you should really live with the room a little too to decide what color would work best and choose the expensive pieces (sofas, wood color, etc) and then pick a paint color. For me, the kitchen though isn't as dependent on this. I have mostly white for cabinets/appliances and wood floors- it's those low ceilings that have me concerned with the color. You mentioned using lighter/cool tones to keep it more "open" and avoid the beadboard wainscotting I wanted to do! Good advice.
Still not sure where and what color to use the embossed wallpaper though!
No, I didn't purchase the tins yet (salvaged ones would've been nice but pricey)
I know what you're referring to and I've seen the embossed paper in "borders"
I guess I could look around for a full wallpaper with the embossed design.
I'm just afraid of wallpaper in general having had so much trouble removing it in the past and expect it'd peel in a kitchen or bathroom due to steam/moisture. I'm the one who had the previous thread about using tone on tone stripes for the kitchen. I just read your Color 101 note though, and I agree you should really live with the room a little too to decide what color would work best and choose the expensive pieces (sofas, wood color, etc) and then pick a paint color. For me, the kitchen though isn't as dependent on this. I have mostly white for cabinets/appliances and wood floors- it's those low ceilings that have me concerned with the color. You mentioned using lighter/cool tones to keep it more "open" and avoid the beadboard wainscotting I wanted to do! Good advice.
Still not sure where and what color to use the embossed wallpaper though!
Annette
10-21-05, 11:29 AM
if your walls are prepped properly (say that fast 10 times!) and you use the proper adhesive, you should have no problems using wallpaper in kitchens or bathrooms. i've done it & never had problems. :thumbup:
i think it'd be great in the backsplash area.
i think it'd be great in the backsplash area.
prowallguy
10-21-05, 02:00 PM
I have done this before with the extruded vinyl.
I sanded and primed the wall with Zinsser's GARDZ, then applied a coat of Sheildz Clear for a pre-wallcovering primer. Then install heavy-duty bridging liner, non-woven is my favorite type.
Then install the embossed vinyl on that. Let dry for 24-48 hours, and prime it with an acrylic primer, tinted close to your finish color. Then apply 1-2 coats of finish color, satin or semi-gloss look best. To make it impervious to water/moisture, apply a couple coats of clear polyurethane. Ben Moore makes a water-based poly that won't yellow, called Stays Clear.
If your thinking the paint/poly will make it a nightmare to remove, thats what the liner paper is for. You should be able to strip it clean, liner/paper and all. :thumbup:
I sanded and primed the wall with Zinsser's GARDZ, then applied a coat of Sheildz Clear for a pre-wallcovering primer. Then install heavy-duty bridging liner, non-woven is my favorite type.
Then install the embossed vinyl on that. Let dry for 24-48 hours, and prime it with an acrylic primer, tinted close to your finish color. Then apply 1-2 coats of finish color, satin or semi-gloss look best. To make it impervious to water/moisture, apply a couple coats of clear polyurethane. Ben Moore makes a water-based poly that won't yellow, called Stays Clear.
If your thinking the paint/poly will make it a nightmare to remove, thats what the liner paper is for. You should be able to strip it clean, liner/paper and all. :thumbup: