Residential & Commercial Security - Locks, Keys & Dead Bolts - removal of connecting bar
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : removal of connecting bar
tanglewood
10-17-05, 07:08 PM
The connecting bar on my old cylinder is too short for my new lock. I want the lock to work with my old key. Is there a way to remove the old connecting bar and replace it with the new one?
schiejr
10-18-05, 07:06 AM
Welcome to the forums, tanglewood!
The cylinder connecting bar is known as the tailpiece. Sounds like you have a rim cylinder. If you bring the cylinder in to a locksmith they should have replacement tailpieces available for minimal cost. Call ahead with the brand to confirm if possible-not all use the same style. Usually there is a spring clip of some sort that holds it on.
The cylinder connecting bar is known as the tailpiece. Sounds like you have a rim cylinder. If you bring the cylinder in to a locksmith they should have replacement tailpieces available for minimal cost. Call ahead with the brand to confirm if possible-not all use the same style. Usually there is a spring clip of some sort that holds it on.