Furniture, Wood and Cabinetry Finishing - How to get a wet or oily look
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : How to get a wet or oily look
mivers
09-21-05, 09:40 PM
Hi All,
I am into woodworking I build wishingweel, windmills, birdfeeders and a number of other things, My question is; I have noticed that in the department stores and other places that some of the wooden product have a wet or oily appearance, does anyone know of an inexpensive way of doing this, I am on a tight budget and not much left over for expensive finishes. Thank you.
I am into woodworking I build wishingweel, windmills, birdfeeders and a number of other things, My question is; I have noticed that in the department stores and other places that some of the wooden product have a wet or oily appearance, does anyone know of an inexpensive way of doing this, I am on a tight budget and not much left over for expensive finishes. Thank you.
marksr
09-22-05, 07:16 PM
You might try CWF. It isn't the longest lasting material but 2 coats [2nd must be applied before 1st cures] will probably give you the look you are seeking. You could also try linseed oil but it might not be as shiny.
mako
10-01-05, 08:35 AM
High gloss polyurethane will do this to some degree. The thicker the better, but note that thicker does not mean more durable. Takes eons for it to cure. Also ambers your wood sharply.
In most professional woodworking venues, high-gloss is not considered to be more desirable. Satin or even matte/dull is usually preferred over high gloss b/c gloss will very quickly make imperfections, scratches, dimples, etc... sore-thumb obvious. That, and things too shiney are hard to photograph and just look plastic in photos and in reality. I'd let the less-shiney look work for you and make it a "selling point".
BTW, for exterior stuff, use Spar-marine varnish. It ambers much more than poly (looks like motor oil) but it is much more outdoor durable. Note though, that it has a slight rubber feel to it since it has to remain somewhat flexible. Mahogany, unstained, looks marvelous with Spar on it.
In most professional woodworking venues, high-gloss is not considered to be more desirable. Satin or even matte/dull is usually preferred over high gloss b/c gloss will very quickly make imperfections, scratches, dimples, etc... sore-thumb obvious. That, and things too shiney are hard to photograph and just look plastic in photos and in reality. I'd let the less-shiney look work for you and make it a "selling point".
BTW, for exterior stuff, use Spar-marine varnish. It ambers much more than poly (looks like motor oil) but it is much more outdoor durable. Note though, that it has a slight rubber feel to it since it has to remain somewhat flexible. Mahogany, unstained, looks marvelous with Spar on it.