Electronic Alarms and Home Security Devices - Default Installer code for GE/ADT SmartSecurity from HomeDepot?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
jstephens816
09-13-05, 06:54 PM
Does anyone know the Default Installer code for GE/ADT SmartSecurity from HomeDepot?

MrRonFL
09-13-05, 07:13 PM
I think these things are a modified GE/ITI Simon system. The default for those is 654321.
jstephens816
09-13-05, 08:34 PM
Thanks. It doesn't work, though.

Have also tried 9713, 4321, 1234, 6321, 123456, 987654.

Any other ideas?

MrRonFL
09-14-05, 05:29 AM
This is the factory default procedure from the Simon 3 manual:
Reset Memory to the Factory Defaults
Note:
If Option 8: Phone Lock is
on, options 04, 05, 06, 08,
09, 12, 13, 54 and Dealer
Code will not reset to their
defaults.

1. Open the panel cover and enter Utility Access code 1.
2. Unplug the transformer and disconnect the battery.
3. Simultaneously press and hold Cancel, Clock Set, and Minutes +.
4. Restore power to the panel with either the battery or the transformer while pressing these three buttons. The panel announces “Hello. System XX OK.” Release the buttons.
5. Connect the remaining power source to the panel.

4321 is the hard factory default.

I've never messed with one of these mass market models, so I don't know how modified it is from the base model.
Frankhs
11-14-05, 02:56 PM
The one from lowes is 1234. Note that the numbering of the buttons is different if you have the case open or closed!

Let me know how it works out . Im still trying to program mine. And I work as a programmer! :wall: