Electronic Alarms and Home Security Devices - ADT Alarm Sounder

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : ADT Alarm Sounder

marky1604
09-11-05, 10:47 AM
Im wiring an ADT sounder to a normal accenta 8 alarm system. I am confused with the terminals. H+ and H- I'm assuming are for the siren output from the panel, as there were red and black wire 'cut offs' still in the terminals.

H+
H-
RTN
-R
ENG
BATT
ST-

Please help
Thanks
Mark

MrRonFL
09-11-05, 02:10 PM
You are probably right. Given that the system you are quoting only shows up on UK websites, I'll assume that you are in the UK. I cannot find very much information on this system. Judging by the websites, this is, or was, a pretty common system, but I've not had any luck finding so much as a user manual, online.

An easy test is to put your meter on those terminals and trip it into alarm if you see 12v, and your siren is a 12v siren, they you are good to go.