Kitchen Large Electric Appliances - dryer not turning
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : dryer not turning
laflaone
08-12-05, 07:08 AM
have a kenmore electric dryer, model 110.67832791. motor runs, but drum doesn't turn. looks like the belt needs replacing. how do i get to it? back cover comes off easily enough, but it appears that i need to remove the top and/or the front. help!
dave6466
08-12-05, 01:19 PM
No need to take off back. Take 2 screws off from lint filter hole on top, lift up top of dryer by prying up from front with a screwdriver or putty knife, take screw out from inside front top of front panel (one on each side), pull up & out to remove front. You can now reach in to remove belt from idler pulley & lift & pull whole drum assembly out. Good idea to check rollers & idler pulley for wear & replace if necessary while you have it apart for belt. Dave
laflaone
08-12-05, 04:21 PM
Thanks for the advice. It worked exactly as you said.