Kitchen Gas Appliances - gas stovetop burning too hot!
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : gas stovetop burning too hot!
06-19-00, 09:00 AM
Hi! We have a fairly new Whirlpool gas stove. When it wasa reinstalled after we had a new floor laid the setting for the gas output is too high. We received no books when we bought this house. I just need to find out how to turn this hot burner down! Hope you can help! Pam :)
06-19-00, 10:13 PM
Hi:pamella59
Puzzling question you pose. Never heard of one burner being too high as a result of moving a stove to lay a new floor.
First, turn on all the top burners and compare the flame sizes. Notice if any burner heads are larger then the rest.
Some makes/models of stoves have one larger burner as a feature. Some have one or two smaller burners as standard or any of several combinations.
If you do need to adjust one burner, there is an orfice on the gas valve. It is brass or bronze in color and has a hex head. This orfice is adjustable using a thin walled 7/16th inch open ended wrench.
Turn the orfice counterclock wise two turns and check the flame size. Adjust as preferred.
However, be aware, if you under size the flame or over size the flame too much, lighting the burner from the spark ignition or pilot may become a problem.
Good Luck,
TomBartco
Natural Gas Energy Technician and Consultant.
Puzzling question you pose. Never heard of one burner being too high as a result of moving a stove to lay a new floor.
First, turn on all the top burners and compare the flame sizes. Notice if any burner heads are larger then the rest.
Some makes/models of stoves have one larger burner as a feature. Some have one or two smaller burners as standard or any of several combinations.
If you do need to adjust one burner, there is an orfice on the gas valve. It is brass or bronze in color and has a hex head. This orfice is adjustable using a thin walled 7/16th inch open ended wrench.
Turn the orfice counterclock wise two turns and check the flame size. Adjust as preferred.
However, be aware, if you under size the flame or over size the flame too much, lighting the burner from the spark ignition or pilot may become a problem.
Good Luck,
TomBartco
Natural Gas Energy Technician and Consultant.