Wallpaper and Wallcoverings - Shiplap & cardboard walls with paper and paint
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Shiplap & cardboard walls with paper and paint
Blinky114
08-08-05, 07:08 PM
I've searched this forum for the answer to my problem, but haven't quite found it.
I'm in a 1910 house with shiplap interior walls. They were covered in some cases with muslin before papering, and in other areas there is only what I can describe as cardboard (about 1/16" thick gray paper) as a base for the many layers of wallpaper (some of those old patterns I'm seeing in stores now ! ! ! ).
I'm curious what's best to do after removing all paper down to bare wood. Someone suggested filling wood gaps with foam insulation "tubes." Are there other suggestions for prepping the wood (1X6" shiplap planks horizontally nailed), some of which is slightly warped, heck, it is 95 years old.
I'm not sure I can use joint compound here, either under or over wall liner, which I'm thinking of using as the surface before painting. Two layers of liner??
Any suggestions are, of course, GREATLY appreciated.
:coffee:
I'm in a 1910 house with shiplap interior walls. They were covered in some cases with muslin before papering, and in other areas there is only what I can describe as cardboard (about 1/16" thick gray paper) as a base for the many layers of wallpaper (some of those old patterns I'm seeing in stores now ! ! ! ).
I'm curious what's best to do after removing all paper down to bare wood. Someone suggested filling wood gaps with foam insulation "tubes." Are there other suggestions for prepping the wood (1X6" shiplap planks horizontally nailed), some of which is slightly warped, heck, it is 95 years old.
I'm not sure I can use joint compound here, either under or over wall liner, which I'm thinking of using as the surface before painting. Two layers of liner??
Any suggestions are, of course, GREATLY appreciated.
:coffee:
prowallguy
08-14-05, 07:45 AM
Are you planning on painting or reinstalling wallcovering?
Is this job to be a full correct restoration, or just a do-over?
Is this job to be a full correct restoration, or just a do-over?
Blinky114
08-14-05, 09:03 AM
I would like to do a full correct restoration. If I find just the right thing, I may wallpaper again, but I'm leaning toward paint, I've done more painting, and only a little wallpapering.
I've seen too much "do-over" work, :eek: and I don't want to do that.
Thanks
blinky
I've seen too much "do-over" work, :eek: and I don't want to do that.
Thanks
blinky
prowallguy
08-14-05, 09:57 AM
A full restoration would include reinstalling the muslin under any wallcoverings.
For painting, liners would probably be the best way to go.
For painting, liners would probably be the best way to go.
Blinky114
08-14-05, 10:19 AM
Thank you!
Most of the walls don't have the muslin, but this THICK gray paper. I've never seen it anywhere available for purchase. Have you ever seen this?
And I haven't seen how to hang the muslin anywhere if I go that route in appropriate areas of the house. Tack/nail & paste, or just tacking/nailing? Then just hang wallcovering like normal?
Also wondering how to give the walls a smoother finish look. I won't be able to hide all the cupped boards, which is fine. I could go with a textured wall covering, for that matter.
ever curious,
blinky/mark
Most of the walls don't have the muslin, but this THICK gray paper. I've never seen it anywhere available for purchase. Have you ever seen this?
And I haven't seen how to hang the muslin anywhere if I go that route in appropriate areas of the house. Tack/nail & paste, or just tacking/nailing? Then just hang wallcovering like normal?
Also wondering how to give the walls a smoother finish look. I won't be able to hide all the cupped boards, which is fine. I could go with a textured wall covering, for that matter.
ever curious,
blinky/mark