Electronic Alarms and Home Security Devices - PC1555MX Gen Sys Supv

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : PC1555MX Gen Sys Supv

delligator
08-03-05, 07:26 PM
I have a PC1555MX system with a 5500 keypad. The trouble light is illuminated and I viewed the trouble. This is what it indicates:
Service Required
Gen Sys Supv <>

Any help with how to fix or clear this trouble would be appreciated.

MrRonFL
08-04-05, 05:32 AM
This can be any number of things, from an option board that doesn't have the tamper jumper bridged, to a keypad that has been removed from the system without the supervision being reset. We'll need a bit more information about the recent history to provide a meaningful answer.
delligator
08-11-05, 08:12 PM
I replaced the basic "Ranger American" keypad with a DSC Programmable keypad. That is when I discovered the issue.

MrRonFL
08-11-05, 08:55 PM
DSC keypads are supervised. You will need to first assign the keypad to the same slot as the previous one (it probably already is if it was the only keypad).

Next you go into installer programming and enter section 902. This will register the new keypad into the system. Once you exit programming things should be back to normal.