Toilets, Sinks, Showers, Tubs and Disposals - new shower surround
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : new shower surround
Newbie
06-20-05, 10:11 PM
Hi ! I need help with my shower surround, Sterling/Kohler that I bought from Low’s.
1. It recommends installing shower controls at a certain height 25 ¾ “, I am remodeling my bathroom and controls are already there. Since there is no holes in the surround yet, why can’t I leave the valve where it is currently?
2. Surround and the base has all bunch of space behind it filled with thin strips of styrofoam. What can I use to fill the rest of the empty space to make it a little quieter and may be a little solid feeling too?
Any other tips/recommendation on installing it would be greatly appreciated.
Thanks,
1. It recommends installing shower controls at a certain height 25 ¾ “, I am remodeling my bathroom and controls are already there. Since there is no holes in the surround yet, why can’t I leave the valve where it is currently?
2. Surround and the base has all bunch of space behind it filled with thin strips of styrofoam. What can I use to fill the rest of the empty space to make it a little quieter and may be a little solid feeling too?
Any other tips/recommendation on installing it would be greatly appreciated.
Thanks,
captwally
06-21-05, 01:39 AM
Obviously cut the holes in the surround to fit your existing fittings. The foam strips are in place to provide you with anchor points, and use them to affix the surround. You can fill the voids with more foam strips, making sure they are closed cell foam that will not absorb moisture. Affix it with Liquid Nails for Tub Surrounds. This will help you avoid the hollow sound and feel. You can also use expanding urethane foam as long as you are very careful to not use too much so that it distorts or warps the surround itself.
Newbie
06-21-05, 08:25 AM
Hey, thanks a lot!
I was thinking of using the expanding foam, but was not sure if it could react with the plastic of the surround. I could fill in the voids of the base and the surround while it's off the studs, then trim it to fit in place.....
I was thinking of using the expanding foam, but was not sure if it could react with the plastic of the surround. I could fill in the voids of the base and the surround while it's off the studs, then trim it to fit in place.....
captwally
06-21-05, 11:20 PM
Applying and trimming the foam prior to installation is an EXCELLENT idea, one I've used myself as a matter of fact.
majakdragon
06-22-05, 12:55 AM
The measurement for the holes may be a "standard". That does not mean you can't change them.
I agree with captwally on the foam. They make two types. One expands with a great force and the other is less force. Lot of people were using the original (great force) in door and window sides and it was pushing with such a great force that it distorted the wood moldings. Since you will do it before installation, it shouldn't matter which you use.. Good luck with your project.
I agree with captwally on the foam. They make two types. One expands with a great force and the other is less force. Lot of people were using the original (great force) in door and window sides and it was pushing with such a great force that it distorted the wood moldings. Since you will do it before installation, it shouldn't matter which you use.. Good luck with your project.