Flooring Tile - HELP - Used too much sealer

First off, thank you for responding to this message.

I have a bit of an issue. I recently had some slate tile installed on my kitchen floor. After the installation I used Stone Tech's Enhancer Pro to seal and enhance the stone. Though I followed the directions, I must not have removed enough of the excess sealant because now there is a sticky haze on the surface that has been there for two days. :wall:

The instructions are very vague about how to fix this situation. All it says is that the sealer may need to be removed through 'mechanical' means. I have scoured the web for products targeted at removing sealant, but I have found nothing.

Can someone point me in the right direction?

Thanks,
Brian

Call there tech support and ask them, they are very helpfull.:)

http://www.stonetechpro.com/products/